From chipping to cutting, our Pneumatic Chipping Hammers balance reliable hitting power with easy handling for dependable performance in a wide range of environmental conditions. They’re designed to deliver the optimal specific blows per minute (BPM) for light and medium-hard renovation and construction tasks.

We keep Pneumatic Chippers of various brands in our inventory.

• Additional information

Brands  : Asko, Chicago Pneumatic
Model No. : AS-52, AS-11, AS-12, AS-13, ACE CH-2, CP4123, CP0012
Pressure : Upto 10 Bar
Usage Application : Construction, Mining

A Pneumatic Drill, much as most air tools require of an air motor with parts such as rotor, rotor blades, cylinder, upper and lower plates as well as bearings. These assembled parts work together to bring life to the tool. By propelling the air with its rotor blades, also known as banes, the motor creates the power that is transmitted through the rotor.

A Pneumatic Reamer is a type of rotary cutting tool used in metalworking. Precision reamers are designed to enlarge the size of a previously formed hole by a small amount but with a high degree of accuracy to leave smooth sides.

We stock both drills and reamers of various sizes in our inventory.

• Additional information

Size : 3/8" to 1"
Brands : Asko
Model No. : AD-5008, AD-5075. AD-515, AD-527, AD-550
Pressure : Upto 10 Bar
Usage Application : Construction, Mining, Civil work

A Pneumatic Concrete Breaker (also known as a Jack Hammer) is a pneumatic tool that combines a hammer directly with a chisel.

A concrete breaker operates (using air from a compressor) by driving an internal hammer up and down. The hammer is first driven down to strike the back and then back up to return the hammer to the original position to repeat the cycle.

Our Concrete Breakers are used in multiple industries like construction and fabrication.

• Additional information

Brands : Ace, Asko, Chicago Pneumatic, Edicon
Model No : AS17, CP117, ACE21PB, CP1210, ACE18PB
Pressure : Upto 10 Bar
Usage Application : Construction, Mining

A Pneumatic Dolly/Holder On is an air powered tool used for backing up rivets of larger sizes in cramped quarters for securing perfectly tight rivets.

Due to it’s comfortable positioning and lack of vibration, the operator can work without fatigue.

We keep Pneumatic Dolly in both off-set and center piston types.

• Additional information

Size: 80mm piston
Brands: Asko
Model No. : AH-BB, AH-DD, AH-EE
Pressure : Upto 10 Bar
Usage Application : Construction, Fabrication

Pneumatic or Air-powered Grinders are used in all sorts of material manipulation efforts. Grinders are used for multiple applications like grinding, buffing, shining etc.

Because of the many attachment discs, you can use, you can transform an angle grinder into completely different tools. For example, an angle grinder used as a cutting tool is just one disc change away from being a sanding tool, or a paint removal solution.

We offer both straight type as well as angle type pneumatic grinders, in various sizes.

• Additional information

Size : 6mm collet to 6" Angle type
Brands : Asko, Powergrip, Powerpoint
Model No. : AG-21, AG-5050, AG-5140, AG-5220, AG-519A, CP319A
Pressure : Upto 10 Bar
Usage Application : Industrial, Textiles, Civil work

Pneumatic Impact wrenches are available in every standard socket wrench drive size, from small ¼” drive tools for small assembly and disassembly, up to 1.½” and larger square drives for major construction.

Impact wrenches are one of the most commonly used air tools in various industries, workshops and garages.

We stock impact wrenches in various types, in many sizes and brands.

• Additional information

Size : 3/8" to 1"
Brands : Asko, Buffalo, Sparta, Sumake, Techno
Model No. : AI-5440, AI-906, AI-910, CP610
Pressure : Upto 10 Bar
Usage Application : Tightening, loosening nut bolts, Workshops & Garages

A Pneumatic Rammer is an air compressor operated tool used for ramming the sand uniformly around the pattern.

A butt, which is attached to the bottom of the piston rod does the operation of ramming. The butt rams the sand at places moved and the sand is uniformly rammed.

Mostly used in foundries and moulds, rammers are now being also used by various small scale industries.

Our Pneumatic Rammers come in 2 variants. Bench Rammers (for small applications) and Floor Rammers (for heavy duty applications). Sizes of the butts vary according to applications.

• Additional information

Brands : Asko, Chicago Pneumatic
Model No. : AR-1, AR-3, AR-4RV, CP4003, CP4711, CP4RV
Pressure : Upto 10 Bar
Usage Application : Construction, Foundries, Furnace moulding

Pneumatic Rivet Busters are versatile air compressor operated tools used for construction and fabrication work.

Earlier used solely for riveting, they are now being used in road construction as well, due to the same hammering application.

We keep stock of 2 main variants of Rivet Busters, in 3/4″ and 1/2″ capacity.

• Additional information

Size : 3/4" to 1"
Brands : Asko, Chicago Pneumatic
Model No. : AR11X, AR21X, CP4611
Pressure : Upto 10 Bar
Usage Application : Construction, Fabrication

Pneumatic Rock Drills are used for mining and rock excavation. They are composed of a piston and a drill rod made of high-carbon steel. The drill rod is held loosely in a chuck at the end of the cylinder and is struck by rapid blows from the freely moving piston.

In addition to Pneumatic Rock Drills, we also keep drill rods of varying lengths in stock.

• Additional information

Brands : Asko
Model No. : ARD-52
Pressure : Upto 10 Bar
Usage Application : Construction, Mining, Civil work

A Pneumatic Riveting Hammer, is an air compressor operated tool used to drive rivets. Nearly all rivet guns are pneumatically powered. Those rivet guns used to drive rivets in structural steel are quite large while those used in aircraft assembly are easily held in one hand.

These days Riveting Guns are not only used in fabrication, but a host of other applications as well.

Our Pneumatic Rivet guns vary in size and shape and have a variety of handles and grips.

• Additional information

Size : 12mm to 32mm
Brands : Ace, Asko, Chicago Pneumatic
Model No. : AR-3X, AR-4X, AR-5, AR-160, AR-180, AR-190, CP4689, ACE-RH-12
Pressure : Upto 10 Bar
Usage Application : Construction, Fabrication

Chisels are used to break or demolish concrete/roads in construction sites.

Made of high quality shock resistant tungsten steel, chisels come in 2 variants: Pointed and Flat. Length can vary from application to application. A chisel requires between 5 and 11 cubic feet per minute (CFM) of airflow to power the blade. This assumes an average air pressure of 90 pounds per square inch (PSI).

• Additional information

Brands : Ace, Asko, CP, Editool
Shank : 1.1/4"
MOC : Shock resistant Steel
Length : 18", 24", 30", 48"
Usage Application : Demolition